MIGUTRANS All-Metal jointing systems comprise a highly engineered aluminium section with rubber cord seals where appropriate. The sections are generally rebated to provide an attractive, skid resistant surface, flush with the floor finish. The profiles provide a durable and highly effective solution for heavy duty applications where large structural movement may occur.
Several Certificates about e.g. load capacity, duration or skid resistance issued by well known, independent institutions in Germany and other countries confirm our commitment. |
 |
 |
For use by Fork Lift Trucks /
Pallet Trucks |
|
|
Typical ApplicationsShopping Centres, Airports, Warehousing, Hospitals, Exhibition Centres, Railway Stations. |
|
|
| Befahrbar mit Schwerlastwagen, Gabelstaplern und Hubwagen |
|
|
Special Properties- Solid All Metal-Profile (hard wearing, maintenance-free, long lasting).
- Visible surface shows no gaps to reduce dirt accumulation.
- Capable of absorbing movement in three directions (Articulated telescoping system).
- Good skid resistance given by striated surface.
- Flash water protected by rubber cords.
- Secure fixing with perforated mounting brackets.
- Profiles are set to the mid-point by means of spacer in our works. This guaranzees easy installation and correct function of the profiles.
- Profiles can be pre-adjusted on request, to achievesingle sided enlargement on the movement capacity.
- Production lengths can be connected by staggering the joint in the individual aluminium profile or by using connection pins (except of profiles ESF 10/15 AL to ESF 10/25 AL).
- To be used by fork lift trucks and pallet trucks free from vibrations - due to special interlocking design(Profilreihe FS100/...).
|
|
|
|
