MIGUTRANS FSRX ... 30 Expansion Joint

Replaceable expanson joint cover for floors with heavy load

FSRX ... 30

Expansion joint cover with new design Generation X

Visible surface has not gaps

prevents accumulation of dirt, minimized cleaning time and effort

Solid all-metal expansion joint

hard wearing, maintenance-free, long lasting

Striated surface

ensures good skid resistance

Articulated telescoping system

absorbs movement in 3 directions

Renovation-friendly installation height of only 30 mm

Punctured leg with MIGUA mounting matrix®

Provides optimal anchoring alternatives in the underground

Now available Anodized!

Perfect match with interior design. Color-fast and light resistant.


Standard version

Standard versionJoint width
max. [mm]
Total
movement
[mm]
Joint width
visible
[mm]
Total width
[mm]
Joint
height
[mm]
Load bearing capacity
lorris (DIN 1072)
[kN]
Load bearing capacity
forklift trucks
acc. (DIN 1055)
[kN]
Load bearing capacity
special vehicles
with solid plastic
tyres
[kg/mm]
FSRX 111/305020 (±10)1112403030013010
FSRX 139/307520 (±10)1392683030015015
FSRX 144/307530 (±15)1442733030013010
FSRX 168/3010040 (±20)1682973030013010
FSRX 180/3011650 (±25)18030930303,5
FSRX 196/3013060 (±30)1963253030010010

The movement component is easy to install and can be replaced without damage.
Thus, the FSRX joint cover can easily be renewed or replaced, e.g. in case of mechanical damage, wear, if a change of colour is desired or the actual joint movements turn out to be different than expected.

Production length: 4 m

Standard colour: Aluminium, available in anodized version, too

Slip resistance according to DIN 51130 rating group R10 (across the joint), R9 (along the joint).

Wall connections and molded parts available on request.

The joint covers FSRX 139 and FSRX 180 are equipped with symmetrical movement components.

Applicable for anodized expansion joint covers:
By anodizing the surface is hardened, but scratches can not be ruled out under mechanical stress of the profiles.
Slight color and / or gloss deviations between different batches or deliveries do not constitute a reason for complaint.
The processing is carried out in accordance with DIN 17611 and the Qualanod (Quality Label for Sulphuric Acid-Based Anodizing of Aluminium) regulations for the anodization of aluminum.
The expansion joint covers must be cleaned and maintained in accordance with the specifications of the Qualanod and the leaflet A5 of the aluminum center.
We are happy to advise you.

Standard colors based on EURAS color fans:
C 0 Nature  C 31 Light  C 32 Light bronze
Other colors on request.

migutrans - FSRX ... 30