MIGUTEC FN 110 Expansion Joint

For floors – Surface fixing

FN 110

Anti slip surface ensures good skid resistance

Special striated surface, also suitbale for sports areas

Flexible MIGUFLEX insert

Hard wearing, temperature resistant (-30°C to +120°C)

Economical

Insert replaceable at any time

Very flat design

Perfect for surface fixing


Standard version

Standard versionTotal
movement
[mm]
Joint width
total
[mm]
Joint width
required
[mm]
Width of insert
[mm]
Installation height
height
[mm]
Thickness of
alu side plates
[mm]
Load bearing capacity
private cars
[kN]
Colors
FN 11060 (±30)3117564406,335
  • black

Installation instructions: Any unevenness in the surface to which the joint cover is being fixed must be remedied by using an epoxy adhesive e.g. Reckli-Adhesive EP. Thereafter the aluminium brackets must be fixed on both sides with countersunk stainless steel screws e.g. Multi Monti type MMS-7,5 ES or similar, at 200 mm intervals.

Production length: 4 m


Corner version

Corner versionTotal
movement
[mm]
Joint width
total
[mm]
Joint width
required
[mm]
Width of insert
[mm]
Installation height
height
[mm]
Thickness of
alu side plates
[mm]
Load bearing capacity
private cars
[kN]
Colors
FN 110 E460 (±30)1977564406,335
  • black
migutec - FN 110